MATERIAL — POLISHED LACQUER (URUSHI)
Ground-Polished Painted Lacquer: A Fifty-Coat Field Record
Colour and metal powder are laid on the ground, then buried beneath many transparent coats and ground back — until the motif rises to the surface as if it grew inside the film, level with it rather than sitting on it.
Posted by AURLUME Editorial · Field Note
01 — Ground & Pattern
Ground & Pattern
The ground is sized, filled and ground level, then lacquered and the motif marked. Gold or silver powder and colour are laid before the layer bonds; how much powder, spread how wide, is all planned for how it will shine once ground back.
02 — Buried Colour
Buried Colour
Further thin transparent coats go over the buried motif, each cured in the chamber. Colour and powder sink beneath the film rather than resting on it; the design no longer sits on the surface but lives inside the lacquer, held in depth and waiting to be revealed.
03 — The Grinding
The Grinding
Grinding is staged. Coarser charcoal levels the film without yet showing the motif; finer powder brings the outline clear; the finest abrasives lift away the last cloud and even the sheen across the surface. The work stops at the right depth — grind too far and the motif chips, too little and the outline stays vague. That judgement, made by eye and finger, is the heart of the method.
04 — Finish
Finish
A final transparent coat goes on, cures, and is ground and polished to a mirror-level surface. The motif appears embedded in the lacquer rather than drawn on it — seamless with the film, level rather than raised; under changing light the metal powder and colour shift faintly, held at depth rather than printed on top.
This fifty-coat route is the deepest accumulation of the three; plain urushi and eggshell inlay are recorded separately.
Works made with this material
Objects built on polished lacquer, shown in the creation wall.